Part Identification Chart - Weider XRS 20 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot find a
part in the hardware kit, check to see if it has been preassembled. Extra hardware may be included.
M10 Washer (52)
M8 Washer (54)
M6 Washer
(53)
M10 Locknut
(57)
M8 Locknut
(58)
M5 x 19mm
M4 x 19mm
Screw (50)
Screw (51)
M6 x 80mm Screw (46)
M10 x 85mm Bolt (43)
M10 x 90mm Carriage Bolt (40)
M10 x 90mm Bolt (42)
M10 x 77mm Bolt Set (45)
M6 x 20mm
Screw (47)
M6 x 40mm Screw (48)
M8 x 70mm Bolt (44)
6