Part Identification Chart - Weider WEBE89617.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M6 x 13mm
Bolt (17)–2
M10 x 65mm Screw (21)–2
M8 x 50mm Carriage
Bolt (15)–4
M6 Washer
(32)–1 M10 Split
Washer (30)–2
M6 Nut M8 Locknut
(25)–2 (20)–4
M6 x 16mm
Screw (13)–6
M10 Washer
(18)–8
M10 Locknut
(16)–7
M6 x 55mm Screw (31)–1
M10 x 70mm Bolt (14)–6
M10 x 95mm Bolt (28)–2
6