Table of Contents
Advertisement
Section 3 – Configuration
Configuration
Getting Started
To access the configuration utility, open a web browser such as Internet Explorer and enter the address of
the router (192.168.100.1 by default).
To log in to the configuration utility, enter the default username admin and the default 8-digit password
printed on the Quick Installation Guide.
Notes:
1. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
2. If you failed the login attempt for 3 times, you will be temporarily locked before log in fields are available
again.
If this is the first time logging into the device, the system will prompt you to set a new password. Note that
the password must be at least 10 characters and contain a mix of letters and numbers.
D-Link DWP-1010 User Manual
9
Advertisement
Table of Contents
