First-Time Configuration Examples - D-Link DAP-2695 Command Line Interface Reference Manual

The following AP configuration examples are provided to help first-time users get started. The user commands are in bold for easy reference.
Many users will want to set a new IP address for the DAP-2695. This will also require setting an IP mask and a Gateway IP address. The following is an example in
which the AP's default IP address of 192.168.0.50 is changed to 192.168.0.55.
Once the user has determined what type of authentication is best for their wireless network, follow the appropriate instructions below.
The following is an example in which authentication is set to Open System.
The following is an example in which the authentication is set to Shared-Key.
802.11 b/g /n Access Point Command Line Interface Manual
WAP -> set ipaddr 192.168.0.55
WAP -> set ipmask 255.255.255.0
WAP -> set gateway 192.168.0.254
WAP -> set channel 6
WAP -> set ssid DAP-2695
WAP -> set authentication open-system
WAP -> set authentication shared-key
WAP -> set keyentrymethod asciitext 1
WAP -> set keylength 64Bit 1
WAP -> set key 1 12345
WAP -> set defkeyindex 1

FIRST-TIME CONFIGURATION EXAMPLES

38
16