Self-Diagnostics - Landice Cardio Trainer Owner's Manual

The Cardio Trainer is equipped with onboard self-diagnostics. If the treadmill experiences any errors during operation, the
treadmill will display the error message. You will have the option to further investigate by commencing the treadmill's self-
diagnostics software (see picture below).
When you choose the option to enter diagnostics you will be prompted with a warning screen (shown below). After reading
it, straddle the treadmill by stepping on the traction strips on the sides of the running surface and press NEXT.
The treadmill will now systematically test all of the individual components of the treadmill. During some of its tests, it will
prompt you with simple "Yes or No" questions to assist with the diagnosis. Answer the questions using the center "+/-" keys
when prompted (see picture below).
Once the Self-Diagnostics has completed all of the tests, it will read one of the two messages along the bottom: "No Errors
Detected", or "Error Detected, Contact Service Provider".
Note: You can also manually enter self-diagnostics mode by pressing the center "+", "-", and
START at the same time when the treadmill is off.
Self Diagnostics
22