Sagem MF 4640 User Manual page 86

Insert chip card (supplied with the drum cartridge) into the card reader ensuring that the chip is
entered as shown in the illustration below.
The following is displayed on the scanner control panel screen:
CHANGE DRUM?
YES = OK - NO = C
Press OK.
Once the chip card has been read, the display shows:
DRUM OK
REMOVE CARD
Remove the card.
Caution -
If the following is displayed, check that you have inserted the chip card the right way up.
CANNOT READ CARD
REMOVE CARD
6-14
Maintenance
Flèche verte