Technical Parameters - Sagem MF 4640 User Manual

Setting your machine
Relay broadcast
Your fax machine (initiator) can relay a document, in other words, transmit a document to your
subscribers via a remote fax and with a precise relay list.
To do this the initiator fax and the remote fax must both have the relay function.
To relay you need to supply the remote fax with the document and the relay list number. The
remote fax will then transmit this document to all subscribers on the list.
Once the relay is activated by your fax and as soon as the document is received by the remote fax,
the document is printed before relaying to all subcribers on the list.
To activate relay from your fax machine:
Insert the document to relay (refer to paragraph Document positioning, page 5-1).
Select M 37 OK - FAX / BROADCAST.
Enter the remote fax number where you will relay to or choose your dialling mode (refer
to paragraph Dialling, page 5-2) and press OK.
Enter the relay list number used by the remote fax and press OK.
You may enter the time you wish to transmit the document next to the current time and
press OK.
If you wish to modify the document feed type, select one of the options
MEMORY
If you wish, you may enter the number of pages of your documents before transmitting.
Activate relay by pressing
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
As delivered your fax is preset by default. However, you may adjust it to meet your requirements
by resetting the technical parameters.
To set the technical parameters:
Select the desired parameter and confirm with OK.
, then press OK.
key.
T
ECHNICAL PARAMETERS
3-7
M 29 OK - SETUP / TECHNICALS
or
FEEDER