Table of Contents
Advertisement
Safety and Environment
7 S
AFETY AND
E
NVIRONMENT
S
AFETY
!
Before powering on your unit, make sure the mains outlet it is connected to meets the require-
ments printed on the warning label on your unit, or on the separate power supply (depending
on the model). This unit must not be installed on the floor.
If your unit works with a separate Power Supply, use only the one delivered with your unit;
never use another power supply.
If your unit works with a battery, replace it only with the same type of battery or an equivalent
type recommended by the manufacturer.
Warning:
Used batteries must be disposed of following the manufacturer's instructions.
Depending on the model, the unit's mains plug may be the only way to disconnect the unit
from the power network. Therefore you must respect the following:
•
Your unit must be connected to a mains outlet located nearby.
•
The mains outlet must remain easily accessible.
Your unit is delivered with a power cord including a plug which, depending on the model, may
be:
•
without earth (the
•
with earth (no symbol on the warning label). It is imperative that a power plug with an
earth be connected to a wall outlet with an earth.
!
APPAREIL A RAYONNEMENT LASER
DE CLASSE 1
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LASER DE CLASE 1
APARELHO A LASER DE CLASSE 1
SAFETY WARNING
incorrect replacement of the battery may cause an explosion. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer's instructions.
symbol on the warning label).
If the machine is powered when you remove the upper cover, be care-
ful with the two following dangers:
•
Laser beam interception by human eye can produce irremedia-
ble injuries.
•
Human contact with parts electrically powered can produce a
very dangerous electric shock.
7-1
Advertisement
Table of Contents
