Sagem MF 4640 User Manual page 57

p
Zoom
Your fax offers to reduce or magnify a specific part of a document from 25% to 400%.
Enter the desired zoom value with the numerical keypad (
Confirm your setting by pressing key OK.
Assembly
Choose the copy type between
Confirm your choice by pressing key OK.
Origin
If you wish, you can change the origin of the scanner.
By entering new values of X and Y given in mm (X < 210 and Y < 286), you will move the
scanning zone as shown on the figure below.
Select the X and Y coordinates with keys
Set the required coordinates with the numeric keypad or
Confirm your setting by pressing key OK.
Contrast
Set the desired contrast with keys
Confirm your setting by pressing key OK.
Luminosity
Set the desired luminosity with keys
Confirm your setting by pressing key OK.
Margins
If you want to shift the side margins of your document to the left or to the right:
Adjust the left / right margins shift (in steps of 0.5 mm) with keys
Confirm your setting by pressing key OK.
y
x
or
ASSEMBLED NOT ASSEMBLED
Scanned area
Top view: scanned side down
or .
or .
or .
5-11
).
ZOOMING
.
or .
or .