Scanning Mode - Sagem Fax Laser Pro 343 sms User Manual

MFL 251 259 240A_MF34 Sagem Gb.book Page 6 Lundi, 24. mars 2003 2:50 14
+
You may enter the time you wish to transmit the document next to the current time and press OK.
+
If you wish to modify the document feed type, select one of the options
then press OK.
+
If you wish, you may enter the number of pages of your documents before transmitting.
+
Activate relay by pressing key
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
This menu, combined with a software program installed on your PC (supplied or on option depending
on model) will enable you to select the machine you wish to receive the documents on:
• fax.
• PC.
• PC if available, fax otherwise.
For more details, please refer to the instruction manual provided with the software kit.
As delivered your fax is preset by default. However, you may adjust it to meet your requirements by
resetting the technical parameters.
To set the technical parameters:
+
Select the desired parameter and confirm with OK.
+
With the keys
press OK.
1 - SCANNING
MODE
2 - TX HEADER
Date en cours : 24 mars 2003
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFL-MFC-MFK\MFL 251 259 240A_LU FAX LASER PRO 343SMS_345SMS Sagem
GB\Setting your machine.fm
.
M 243 OK - SETUP / RECEPTION / PC RECEPT.
5 6
or , modify the parameter settings by following the table below and
1 - NORMAL
Default value of the scan mode resolution for the documents
2 - FINE
to be transmitted.
3 - SFINE
4 - PHOTO
1 - WITH
If this parameter is on, your header will appear on all
2 - WITHOUT
documents sent to your subscribers with your name, number,
date and number of pages.
Warning: If you send a fax from the document loader, the
transmission header will not appear on the document your
correspondent receives.
3-6
Setting your machine
or
FEEDER MEMORY
M 29 OK - SETUP / TECHNICALS
,