Table of Contents
Advertisement
MFL 251 259 240A_MF34 Sagem Gb.book Page 7 Lundi, 24. mars 2003 2:50 14
Setting your machine
3 - TX SPEED
1 - 33600
2 - 14400
3 - 12000
4 - 9600
5 - 7200
6 - 4800
7 - 2400
4 - ECHO PROTECT
1 - WITH
2 - WITHOUT
6 - EPT MODE
1 - WITH
2 - WITHOUT
7 - COM. DISPLAY
1 - SPEED
2 - PAGE NUMBER
8 - ECO ENERGY
1 - WITHOUT
2 - DELAY 5 MIN
3 - DELAY 15 MIN
4 - DELAY 30 MIN
5 - STDBY PERIOD
10 - RX HEADER
1 - WITH
2 - WITHOUT
11 - RX SPEED
1 - 33600
2 - 14400
3 - 9600
4 - 4800
5 - 2400
12 - RINGS
2 TO 9
20 - E.C.M.
1 - WITH
2 - WITHOUT
70 - NET VALID
06:01 TO 21:59
71 - NET ACTIVE
7 DAYS / WEEK
MON TO FRI
Date en cours : 24 mars 2003
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFL-MFC-MFK\MFL 251 259 240A_LU FAX LASER PRO 343SMS_345SMS Sagem
GB\Setting your machine.fm
Transmission speed for outgoing documents.
For a quality telephone line (compatible, no echo),
communications occur at maximum speed.
However, it may be necessary to restrict the transmission
speed for some calls.
If this parameter is on, the on-line echo will be reduced during
long distance calls.
For some long distance calls (satellite), the on-line echo may
disturb the call.
Choice between transmission speed displayed or number of
the page in progress.
Choosing the printer standby delay: the printer will switch to
standby after a delay (in minutes) of NON-operation or during
the period of time of your choice.
If this parameter is on, all documents received by your fax
will include the subscriber's header with his name, number (if
available) fax print date and the page number.
Transmission speed for incoming documents.
For a quality telephone line (compatible, no echo),
communications occur at maximum speed.
However, it may be necessary to restrict the transmission
speed for some calls.
Number of rings to automatically start your machine.
This parameter helps correct the calls made on
disturbed telephone lines. It is used when the lines are weak
or too noisy. Transmission times may be longer.
This parameter lets you modify the period when the fax
connects automatically to the Internet.
This menu is available only if the connection type is set to
(
).
PERIODIC
M 941
This parameter lets you select the days of the week when the
fax connects automatically to the Internet.
This menu is available only if the connection type is set to
(
).
PERIODIC
M 941
3-7
Advertisement
Table of Contents
