Sagem Fax Laser Pro 343 sms User Manual page 24

MFL 251 259 240A_MF34 Sagem Gb.book Page 16 Lundi, 24. mars 2003 2:50 14
+
Make sure the On/Off switch is set to 0 (Off).
Key to the diagram:
A: Telephone line connector
B: LAN connector (depending on
model)
C: USB port (option)
D: Parallel port (option)
E: AC power connector
(model depending on country)
1: Line cord
(model depending on country)
2: AC power cord
(model depending on country)
+
Plug end of the telephone line (1) into the connector on the fax machine (A), and the other end
into the wall telephone socket.
+
LAN connection (depending on model). Plug end of the LAN cord (as provided by your network
administrator) into port (B) of your fax machine and the other end into your local network port
dedicated to your fax machine.
Caution -
Refer to safety procedures in the Safety Chapter.
+
Plug end of the main power cord (2) into the connector (E) on the fax machine, and the other end
in the wall outlet.
+
Set the On/Off switch to position 1 (On).
After a few seconds, when the printer has warmed up, the date and time will appear.
A chip card is delivered with the consumables. This card initialises the consumables system
(consumption levels, fealures ...).
After every new consumable installation, the chip card has to be read by the machine.
Date en cours : 24 mars 2003
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFL-MFC-MFK\MFL 251 259 240A_LU FAX LASER PRO 343SMS_345SMS Sagem
GB\Installation Gb.fm
1-16
Installation