Sagem Fax Laser Pro 343 sms User Manual page 64

MFL 251 259 240A_MF34 Sagem Gb.book Page 4 Lundi, 24. mars 2003 2:50 14
+
Position the document (refer to paragraph Document positioning, page 5-1)
+
Enter the fax number or choose your dialling mode (refer to paragraph Dialling, page 5-2) then
press
The "Line" icon flashes during the call phase, it stays lit when both faxes are in communication
+
At the end of transmission the initial screen is displayed
This function allows you to transmit a document at a later time.
To program a postponed transmission you need to identify the subscriber number, transmission time,
feeder type and number of pages.
To delay the transmission time of your document :
+
Position the document (refer to paragraph Document positioning, page 5-1)
+
Select M 31 OK - FAX / TRANSMISSION
+
Enter the subscriber number you wish to program at a different time or choose your dialling
mode (refer to paragraph Dialling, page 5-2) and confirm with OK
+
Next to the current time, enter the new time and confirm with OK
+
Adjust the contrast and confirm by pressing the OK key
+
Select the feed type,
feed type, page 3-3)
+
You may enter the number of pages before transmission and confirm with OK
+
Confirm postponed transmission by pressing key
Your document is stored and will be sent at the new time.
This function allows you to monitor the dialling operation during a fax transmission. In this case, the
maximum transmission rate will be 14400 bps.
This function allows for example:
• to hear if the subscriber's fax is engaged and if so, choose the moment when the line is clear to
start the document transmission
• to control the communication progress in case of uncertain numbers, etc
Date en cours : 24 mars 2003
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFL-MFC-MFK\MFL 251 259 240A_LU FAX LASER PRO 343SMS_345SMS Sagem
GB\Operation Gb.fm
or and confirm with OK (refer to paragraph Document
FEEDER MEMORY
5-4
Operation