Advertisement
MFL_251 270 819 A_LASER PRO 341 GB.book Page 6 Mercredi, 23. avril 2003 2:55 14
Once the relay is activated by your fax and as soon as the document is received by the remote fax, the
document is printed before relaying to all subcribers on the list.
To activate relay from your fax machine:
+
Insert the document to relay (refer to paragraph Document positioning, page 5-1).
+
Select M 37 OK - FAX / BROADCAST.
+
Enter the remote fax number where you will relay to or choose your dialling mode (refer to
paragraph Dialling, page 5-2) and press OK.
+
Enter the relay list number used by the remote fax and press OK.
+
You may enter the time you wish to transmit the document next to the current time and press OK.
+
If you wish to modify the document feed type, select one of the options
then press OK.
+
If you wish, you may enter the number of pages of your documents before transmitting.
+
Activate relay by pressing key
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
As delivered your fax is preset by default. However, you may adjust it to meet your requirements by
resetting the technical parameters.
To set the technical parameters:
+
Select the desired parameter and confirm with OK.
+
With the keys
press OK.
1 - SCANNING
MODE
2 - TX HEADER
Date en cours : 23 avril 2003
\\Sct31nt3\BE31-DOC\DOC 31 - En cours\Travaux en cours\MFL-MFC-MFK\MFL_251 270 819 A_LASER PRO 341 GB_EXPORT\Setting your
machine.fm
.
5
6
or
, modify the parameter settings by following the table below and
1 - NORMAL
Default value of the scan mode resolution for the documents
2 - FINE
to be transmitted.
3 - SFINE
4 - PHOTO
1 - WITH
If this parameter is on, your header will appear on all
2 - WITHOUT
documents sent to your subscribers with your name, number,
date and number of pages.
Warning: If you send a fax from the document loader, the
transmission header will not appear on the document your
correspondent receives.
3-6
Setting your machine
or
FEEDER
MEMORY
M 29 OK - SETUP / TECHNICALS
,
Advertisement
