Table of Contents
Advertisement
3-15. PROGRAMMING
(Continued)
3-16. SPECIAL PROGRAM MODE
3-18
Another product can be programmed while in the program
mode by following these procedures:
Press and hold the SCAN button at any time while in the
Program Mode and the display will scroll "SELECT PROD-
UCT". Then press any of the product buttons, (1-0), and
now that product can be programmed.
14. To program second interval, press and release the
SCAN button while in the Time Mode of the first mode.
"INT2" and "TIME" will flash on the left side of the display.
Then follow the steps above, starting with step 4.
Review Usage
1.
Press and hold the FUNCTION button for two seconds until
"REG PROGRAM" shows in the display. As soon as
"REG PROGRAM" shows in the display, press and release
the FUNCTION button 1 time until "REVIEW USE" shows
in the display.
2.
"DAILY" shows in the display. Press any of the product
buttons to view the usage of that product. Press and hold the
FUNCTION button to exit Special Program mode.
Reset Usage
1.
Press and hold the FUNCTION button for two seconds until
"REG PROGRAM" shows in the display. As soon as "REG
PROGRAM" shows in the display, press and release the
FUNCTION button 2 times until "RESET USE" shows in
display.
2.
When "CODE" shows in the display, press 1-3-5. "DAILY
will show in the display, and press any of the Product buttons
to reset them to 0.
Model OFG- 390
703
Advertisement
Table of Contents
