Table of Contents
Advertisement
3-6. BASIC OPERATION
703
Follow the procedure below on the initial start-up of the fryer, and
each time the fryer is brought from a cold, or shut down condition,
back into operation. These are basic, general instructions. Be sure
to follow KFC's Standards Library when operating the fryer.
1.
Make sure the frypot is filled with shortening to 2 the lower
level indicators
DO NOT OVERLOAD, OR PLACE PRODUCT WITH
EXTREME MOISTURE CONTENT INTO THE
RACKS. 20 LBS. (9.0 KG.) IS THE MAXIMUM
AMOUNT OF PRODUCT PER FRYPOT. FAILURE
TO FOLLOW THESE INSTRUCTIONS CAN RE
SULT IN SHORTENING OVERFLOWING THE
FRYPOT WHICH COULD CAUSE SERIOUS
BURNS, PERSONAL INJURY, FIRE AND/OR
PROPERTY DAMAGE.
2.
Turn the POWER/PUMP switch to the POWER position and
press the appropriate product button to select the amount
of product to be cooked.
The controls have a 45 second delay from when the
power switch is turned on, to when the burners ignite.
All safety devices shut off the gas supply to the burner.
Follow the above procedures to restart the fryer. Notify a
qualified service technician if the shut down is repeated.
3.
Stir the shortening as it's heating up from a cold start.
Be sure to stir down into the cold zone.
DO NOT STIR THE SHORTENING AT ANY OTHER
TIME EXCEPT AT MORNING START-UP. FAIL-
URE TO FOLLOW THESE INSTRUCTIONS CAN
RESULT IN SHORTENING OVERFLOWING THE
FRYPOT WHICH COULD CAUSE SERIOUS
BURNS, PERSONAL INJURY, FIRE, AND/OR
PROPERTY DAMAGE.
Model OFG- 390
3-7
Advertisement
Table of Contents
