Universal Serial Bus - Albatron PX915P4C Series User Manual

Supports Hyper-Threading Technology
533/ 800 MHz FSB (Front Side Bus) frequencies
Chipset:
Northbridge Chipset – Intel® 915P (PX915P4C Series)/ 915G (PX915G4C Series)
Southbridge Chipset – Intel® ICH6
I/O Controller – Winbond W83627THF
HD Aduio Codec – Realtek ALC880
LAN Controller – VIA® VT6105 (for PX915P4C PRO / PX915G4C PRO)
DRAM Memory:
Uses either DDR400 (PC3200) or DDR333 (PC2700) SDRAM
SDRAM modules must be unbuffered and non-ECC
Supported memory module increments are 256 MB /512 MB /1 GB
Total memory capacity is 4 GB (see Memory Installation section for more details)
Supports Dual-Channel data bus
PCI-Express BUS Slots:
Provides 1 x 16 PCI Express slot with 4 GB/s bandwidth (each direction)
Provides 2 x 1 PCI Express slots with 250 MB/s bandwidth (each direction)
All PCI Express slots are fully PCI Express 1.0a compliant
PCI BUS Slots:
Provides 3 PCI slots
Contains 33MHz, 32bit PCI interface, PCI 2.3 is compliant

Universal Serial Bus:

Supports up to 8 USB ports for USB compliant interface devices
Supports USB 2.0 Enhanced Host Controller Interface (EHCI) and USB 1.1 Universal Host
Controller Interface (UHCI)
Onboard IDE Facilities:
Supports Ultra ATA 66/ 100, DMA and PIO modes
Supports IDE interface with CD-ROM
Supports high capacity hard disk drives
IDE slot can support 2 IDE drives
PX915P4C/ PX915G4C Series
2