Table of Contents
Advertisement
Save & Exit Setup
Save all configuration changes to CMOS (memory) and exit setup. A confirmation message will be
displayed before proceeding.
Exit Without Saving
Abandon all changes made during the current session and exit setup. A confirmation message will be
displayed before proceeding.
Chapter 3: Software Setup
Software List
Category
Intel Chipset INF
Realtek Audio Driver
Intel onboard VGA Driver (only for PX915G4C series)
VIA Network Driver (Only for PX915P4C PRO/ G4
PRO)
Trend PC-Cillin
Microsoft DirectX
Adobe Acrobat Reader
Note: Because the Realtek HD Audio and Intel Onboard VGA do not support Windows® 98/ ME,
therefore we strongly recommend you installing Windows® 2000/ XP.
Software Installation
Place the Driver CD into the CD-ROM drive and the Installation Utility will auto-run. You can also
launch the Driver CD Installation Utility manually by executing the Intel.exe program located on the
Driver CD. (For more details, please refer to the Readme.txt files that in each folder of the Driver.)
The screen and images are only for general reference. The version of the screens you
◎
received with your software may vary slightly.
1. When you insert the driver CD into the CD ROM, you'll see the screen as the picture below. There
are several buttons displayed in the main screen as shown below.
PX915P4C/ PX915G4C Series
Platform
Windows 98 /ME /2000 /XP
Windows 2000 /XP
Windows 2000 /XP
Windows 98 /ME /2000 /XP
Windows 98 /ME /2000 /XP
Windows 98 /ME /2000 /XP
Windows 98 /ME /2000 /XP
42
Advertisement
Table of Contents
