Universal Serial Bus - Albatron K8NF4 Series User Manual

LAN PHY Chip:
Broadcom AC131 10/ 100 Mbps Ethernet support (Optional)
VITESSE CIS8201 10/ 100/ 1000 Mbps Ethernet support (Optional)

Universal Serial Bus:

Supports up to eight USB ports for USB interface devices
Supports USB 2.0 Enhanced Host Controller Interface (EHCI) and dual USB 1.1 Open
Host Controller Interface (OHC1)
IDE Facilities:
Supports Ultra ATA 66, Ultra ATA 100, Ultra ATA 133
Supports IDE interface with CD-ROM
Supports high capacity hard disk drives
Supports installation of up to 4 drives, with separate IDE connections for Primary and
Secondary connectors
Serial ATA or Serial ATA2 facilities:
Compatible with SATA 1.0
Compatible with SATA 2.0 (K8NF4U only)
Supports Serial ATA specification of 150 MB/sec transfers
Supports Serial ATA specification of 300 MB/sec transfers (K8NF4U only)
Supports SATA RAID 0/ 1/ 0+1/ JBOD mode
I/O facilities:
One multi-mode Parallel Port capable of supporting the following specifications:
1. Standard & Bi-direction Parallel Port
2. Enhanced Parallel Port (EPP)
3. Extended Capabilities Port (ECP)
Supports one serial port 16550 UART in the back panel and one optional onboard serial
port header (COM2).
Supports one SPDIF-OUT RCA port and an SPDIF IN/OUT onboard header
Supports Infrared Data Transmissions using IrDA(optional)
Supports PS/2 mouse and PS/2 keyboard
Supports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB floppy disk drives
Game port compatible (optional)
3
K8NF4 Series