Table of Contents
Advertisement
DIMM4 share the second channel. Enabling Dual-Channel simply means to make sure that the total
memory for the two channels are balanced. For example: If you install one 256 MB module in DIMM1
and one in DIMM2 (256MB x 2 = 512MB), you must install a total of 512 MB between DIMM3 and DIMM4. In
balancing the memory on the two channels, you have, in effect, enabled Dual-Channel.
RAM Module Installation:
The following instructions explains memory module installation for these mainboards:
1. Pull the white plastic tabs at both ends of the slot away from the slot.
2. Match the notch on the RAM module with the corresponding pattern in the DIMM slot. This will
ensure that the module will be inserted with the proper orientation.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the module snaps
into place.
4. Repeat steps 1, 2 & 3 for the remaining RAM modules.
＊ The pictures above are for reference only. Your actual
installation may vary slightly from the pictures.
Back
Panel
PX915P4C/ PX915G4C Series
11
Advertisement
Table of Contents
