Albatron PX915P4C Series User Manual page 48

3. If you click the "Browse CD" button from the screen in step 1, you can browse all the files in the
Driver CD.
4. Click "Exit" button to exit the program.
How to install Windows® 98/ ME to the SATA device?
1. Make sure that the "On-Chip Serial ATA" option is set to " Combined Mode" in the BIOS Setup
Utility. (For more details, please see page 33 "OnChip Serial ATA Setting".)
BIOS Setup Utility -> Integrated
"Combined Mode"
2. Save all BIOS configurations and exit the BIOS setup utility.
3. Place the Windows® 98/ME CD into the CD-ROM drive to begin the OS installation process. During
the installation you will see that the SATA device has been assigned to the C: drive. Continue and
complete the installation of the Windows® OS.
4. Because the SATA device only support windows® 2000/ XP, therefore, If you want to install
windows® 98/ ME, you must had the SATA devices simulate PATA device (by using IDE channel). So
that you should set the "On-Chip Serial ATA" options to "Combined Mode" all time in the BIOS
Setup Utility.
PX915P4C/ PX915G4C Series
Peripherals OnChip IDE Device
44
On-Chip Serial ATA