Specification - Albatron PX915P4 Series User Manual

Px915p4/px915g4 series;
Table of Contents

Advertisement

Specification

CPU:
Supports Socket 478 Pentium
Supports Hyper-Threading Technology
533/ 800 MHz FSB (Front Side Bus) frequencies
Chipset:
Northbridge Chipset – Intel® 915P (PX915P4 Series)/ 915G (PX915G4 Series)
Southbridge Chipset – Intel® ICH6
I/O Controller – Winbond W83627THF
RAID IDE Controller – ITE IT8212F
HD Aduio Codec – Realtek ALC880
Gb LAN Controller – Marvell® MV8001
Mb LAN Controller – VIA® VT6105 (for PX915P4 PRO / PX915G4 PRO)
DRAM Memory:
Uses either DDR400 (PC3200) or DDR333 (PC2700) SDRAM
SDRAM modules must be unbuffered and non-ECC
Supported memory module increments are 256 MB /512 MB /1 GB
Total memory capacity is 4 GB (see Memory Installation section for more details)
Supports Dual-Channel data bus
PCI-Express BUS Slots:
Provides 1 x 16 PCI Express slot with 4 GB/s bandwidth (each direction)
Provides 2 x 1 PCI Express slots with 250 MB/s bandwidth (each direction)
All PCI Express slots are fully PCI Express 1.0a compliant
PCI BUS Slots:
Provides 3 PCI slots
Contains 33MHz, 32bit PCI interface, PCI 2.3 is compliant
Universal Serial Bus:
Supports up to 8 USB ports for USB compliant interface devices
Supports USB 2.0 Enhanced Host Controller Interface (EHCI) and USB 1.1 Universal Host
Controller Interface (UHCI)
PX915P4/ PX915G4 Series
®
4 processor (Prescott)
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Px915g4Px915p4 proPx915g4 pro

Table of Contents