Table of Contents
Advertisement
**Reload Global Timer Events**
When a system goes into suspend mode, certain devices must be inactive for a period of time.
Conversely, if any of those devices have any activity, the system will awaken. You can select the
devices that will participate in suspend/power-on activity by configuring these fields. Devices include:
Primary IDE 0/ Primary IDE 1/ Secondary IDE 0/ Secondary IDE 1/ FDD,COM,LPT Port/ PCI PIRQ
[A-D]#. Options: Disabled (default), Enabled
Hardware Monitor
Case Open Warning
If this function is set to "Enabled" and the case had been previously opened, the system will
automatically display alert messages on the screen when you power on your computer. If this function is
set to "Disabled", the system will not show alert messages when you power on your computer even if the
case had been previously opened.
Options: Disabled (default)、Enabled
Smart CPUFAN Temperature
This function allows you to select the CPU temperature. If the CPU temperature is higher than the value
you've selected, the CPUFAN will accelerate till the temperature cools down to the defaulted value you
set.
Options: Disabled (default)、30
o
o
o
/ 131
F、60
C / 140
F、65
o
o
o
o
C / 86
F、35
C / 95
F、40
o
o
o
o
C / 149
F、70
C / 158
F、75
40
PX915P4/ PX915G4 Series
o
o
o
o
C / 104
F、45
C / 113
F、50
o
o
o
o
C / 167
F、80
C / 176
F、85
o
o
o
C / 122
F、55
C
o
o
C / 185
F
Advertisement
Table of Contents
