Specification - Albatron PX915PD Series User Manual

Specification

CPU:
Supports Socket 775 Pentium
Supports Hyper-Threading Technology
533/ 800 MHz FSB (Front Side Bus) frequencies
Chipset:
Northbridge Chipset – Intel® 915P (PX915PD series)/ 915G (PX915GD series)
Southbridge Chipset – Intel® ICH6
I/O Controller – Winbond W83627THF
RAID IDE Controller – ITE IT8212F (for PX915PD (GD) PRO II/ PX915PD (GD) PRO)
HD Aduio Codec – Realtek ALC880
Gb LAN Controller – Marvell® MV8001
Mb LAN Controller – VIA® VT6105 (only for PX915PD (GD) PRO II)
DRAM Memory:
Supports either two DDR 400/300 SDRAM memory modules or two DDRII 533/400
SDRAM memory modules.
Total mainboard memory capacity is 2 GB.
Supports Dual-Channel DDR and DDRII memory architectures.
DDR and DDRII memory modules must be unbuffered and non-ECC
Supported memory increments include 256 MB/ 512 MB/ 1GB
PCI-Express BUS Slots:
Provides 1 x 16 PCI Express slot with 4 GB/s bandwidth (each direction)
Provides 2 x 1 PCI Express slots with 250 MB/s bandwidth (each direction)
All PCI Express slots are fully PCI Express 1.0a compliant
PCI BUS Slots:
Provides 2 PCI slots
Contains 33MHz, 32bit PCI interface, PCI 2.3 is compliant
Accelerated Graphics Port Extension Slot:
Provide 1 AGP extension slot
Support install 8X/ 4X AGP cards
PX915PD/ PX915GD Series
® 4 Prescott processor
2