Table of Contents
Advertisement
PX915P4/ PX915G4 Series
Solutions: Back up any salvageable data. Then performs low level format, partition, and then a high level
format the hard drive. Re-install all saved data when completed.
Problem 6:
Screen message says "Invalid Configuration" or "CMOS Failure."
Causes: Incorrect information entered into the BIOS setup program.
Solutions: Review system's equipment. Reconfigure the system.
Problem 7:
The Screen is blank.
Causes: No power to monitor.
Solutions: Check the power connectors to the monitor and to the system.
Problem 8:
Blank screen.
Causes:
1. Memory problem.
2. Computer virus.
Solutions:
1. Reboot computer. Reinstall memory. Make sure that all memory modules are securely installed.
2. Use anti-virus programs to detect and clean viruses.
Problem 9:
Screen goes blank periodically.
Causes: Screen saver is enabled.
Solutions: Disable screen saver.
47
Advertisement
Table of Contents
