Headers & Jumpers - Albatron K8NF4 Series User Manual

Headers & Jumpers
Front USB Headers (Yellow): USB1/ USB2
This mainboard provides 2 USB headers on the board allowing for 4 additional USB ports.
To make use of these headers, you must attach a USB bracket/cable with USB ports (some
models will come packaged with a USB 4-port bracket-cable). The optionally packaged
bracket will have two connectors that you can connect to the headers (USB1, USB2). The
other end (bracket containing the USB ports) is attached to the computer casing. The
onboard USB headers do not support the USB wake up function like those on the back
panel do.
If you are using a USB 2.0 device with Windows® 2000/XP, you will need
to install the USB 2.0 driver from the Microsoft® website. If you are
using Service pack 1 (or later) for Windows® XP, and using Service
pack4 (or later) for Windows® 2000, you will not have to install the
driver.
Front Serial Port Header: COM2 (Optional)
This mainboard supports an optional front serial header. To use this header, you can install a COM
port & Game Port bracket (optional) with a wire extending to this header. You can then attach your
serial device to the serial port on the bracket.
.
14
K8NF4 Series