Irqs Activity Monitoring - Albatron PM266A PRO User Manual

HDD & FDD
When set to "On", any event occurring on a hard drive activity or a floppy drive activity will awaken
the system which had been previously suspended. Options: ON (default)、OFF
PCI Master
When set to "On", you need a LAN add-on card which supports the power on function. It should also
support the wake-up on LAN jumper. Options: OFF (default)、ON
PCI PME Wake Up
When you select "Enabled", a PME signal from any PCI card will awaken the system from suspend
mode. Options: Disabled (default)、Enabled.
Wake Up On Ring
This option allows you to awaken the system upon receiving an incoming call a modem device.
Options: Disabled (default)、Enabled
RTC Wake Up
When "Enabled", you can set the date and time at which the RTC (real-time clock) alarm awakens
the system from Suspend mode. Options: Enabled、Disabled (default)
Date (of Month)
You can choose which month the system will boot up. This field is only configurable when "RTC
Wake Up" is set to "Enabled"
Resume Time (hh: mm: ss)
You can choose the hour, minute and second the system will boot up. This field is only configurable
when "RTC Wake Up" is set to "Enabled"

IRQs Activity Monitoring

Press Enter to access a sub menu used to configure the different wake up events (i.e. wake on LPT &
COMM activity).
Primary INTR
IRQ3 (COM2)
IRQ4 (COM1)
IRQ5 (LPT2)
IRQ6 (Floppy Disk)
IRQ7 (LPT1)
IRQ8 (RTC Alarm)
On IRQ9 (IRQ2 Redir)
Enabled IRQ10 (Reserved)
Enabled IRQ11 (Reserved)
Enabled IRQ12 (PS/2 Mouse)
Enabled IRQ13 (Coprocessor)
Enabled IRQ14 (Hard Disk)
Disabled IRQ15 (Reserved)
38
PM266A PRO/ PM266A
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled