CyberData 11113 Operation Manual page 39

Web Page Item
Call Button
ID
Security Code (0 through 9)
Play Button Tone
Allow Telephone Dialout
Misc Settings
Play Button Tone
3. After changing the parameters, click the Save button.
Operations Guide
Table 2-11. Button Configuration Parameters (continued)
Description
Enter the desired dial-out extension number (64 character
limit). Security codes are limited to seven characters and
are activated with the # key.
Note: For information about dial-out extension strings and
DTMF tones, see
Strings and DTMF Tones (using
Type the desired Extension ID (64 character limit).
Enter the desired security code number (7 character limit).
When a security code is entered on the keypad that
matches one of the seven-digit fields specified on the
page, the relay will be activated.
This setting applies to all modes and determines whether
the device will play an audible sound out of the speaker
when doing any of the following:
• Entering a security code
• Initiating a speed dial
• Pressing the keys in cellphone and telephone modes
See
Code".
Check this box to hear a tone when a keypad button is
pushed.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930323G
Installing the VoIP Indoor Intercom with Keypad
Section 2.3.6.1, "Dial Out Extension
Section 2.3.6.2, "Triggering a Dialout Call or Security
Parts List
rfc2833)".
CyberData Corporation
33