CyberData 11113 Operation Manual page 26

3. On the Home Page, review the setup details and navigation buttons described in
Web Page Item
Device Settings
Device Name
Change Username
Change Password
Re-enter Password
Current Settings
Serial Number
Mac Address
Firmware Version
IP Addressing
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
Speaker Volume
Microphone Gain
SIP Mode is
Multicast Mode is
Event Reporting is
Nightringer is
Keypad Mode is
Operations Guide
Installing the VoIP Indoor Intercom with Keypad
Table 2-7. Home Page Overview
Description
Shows the device name.
Type in this field to change the username.
Type in this field to change the password.
Type the password again in this field to confirm the new password.
Shows the device serial number.
Shows the device Mac address.
Shows the current firmware version.
Shows the current IP addressing setting (DHCP or static).
Shows the current IP address.
Shows the current subnet mask address.
Shows the current default gateway address.
Shows the current DNS Server 1 address.
Shows the current DNS Server 2 address.
Shows the current speaker volume level.
Shows the current microphone gain level.
Shows the current SIP Mode status.
Shows the current Multicast Mode status.
Shows the current Event Reporting status.
Shows the current Nightringer status.
Shows the current Keypad Mode status.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930323G
Parts List
Table 2-7.
CyberData Corporation
20