Acknowledge Handler Object, Class 0X2B - ABB RDNA-01 User Manual

# Attribute
name
7 Produced
Connection
Size
8 Consumed
Connection
size
9 Expected
Packet Rate
12 Watchdog
Timeout Action
13 Produced
Connection
Path Length
14 Produced
Connection
Path
15 Consumed
Connection
Path Length
16 Consumed
Connection
Path
17 Production
Inhibit Time

Acknowledge Handler Object, Class 0x2B

The Acknowledge Handler Object is used to manage the reception
of message acknowledgements. This object communicates with a
message producing Application Object within the device. The
Acknowledge Handler Object notifies the producing application of
acknowledge reception, acknowledge timeouts and production
retry limit.
Services Description
Get Maximum number of bytes
transmitted across this
Connection
Get Maximum number of bytes
received across this Connection
Get,Set Defines timing associated with
this Connection.
Get Defines how to handle
Inactivity/Watchdog timeouts.
Get Number of bytes in the
produced_connection_path
length attribute
Get Application Object producing
data on this Connection
Get Number of bytes in the
consumed_connection_path
length attribute
Get Specifies the Application
Object(s) that are to receive the
data consumed by this
Connection Object.
Get,Set Defines minimum time between
new data production.
Default, Data
Minimum, type
Maximum
0,0,N/A UINT16
0,0,N/A UINT16
0,0,0xffff UINT16
N/A,N/A, UINT8
N/A
3,0,3 UINT16
0x62 Array of
0x39 UINT8
0x37,
0,N/A
5,0,5 UINT16
0x62 Array of
0x31 UINT8
0x35,
N/A,N/A
0,3FFF, UINT16
N/A
Communication
71