Odva Input Attributes - ABB RDNA-01 User Manual

Net Ctrl (Control Supervisor Object)
This attribute requests that the drive Run/Stop command be
supplied locally (Net Ctrl = 0) or by the network (Net Ctrl = 1).
Net Ref (AC/DC Drive Object)
This attribute requests that the drive speed and torque references
be supplied locally (Net Ref = 0) or by the network (Net Ref = 1).
Speed Reference (AC/DC Drive Object)
This attribute is the speed reference for the drive. The units are
scaled by the Speed Scale attribute of the AC/DC Drive Object.
Torque Reference (AC/DC Drive Object)
This attribute is the torque reference for the drive. The units are
scaled by the Torque Scale attribute of the AC/DC Drive Object.

ODVA input attributes

This section briefly describes the instances found in the ODVA
AC/DC Drive Profiles input assemblies. Not all attributes listed
here will be supported by all input assembly instances.
Faulted (Control Supervisor Object)
This attribute indicates that the drive has experienced a fault. The
fault code may be read from the FaultCode attribute of the Control
Supervisor Object.
Warning (Control Supervisor Object)
This attribute indicates that the drive is experiencing a warning
condition. The warning code may be read from the WarnCode
attribute of the Control Supervisor Object.
Running Forward (Control Supervisor Object)
This attribute indicates that the drive is running in the forward
direction.
Running Reverse (Control Supervisor Object)
This attribute indicates that the drive is running in the reverse
direction.
Communication profiles
49