5. Troubleshooting
~I Push the Endorser in until it chcks,
and tuck the Endorser's power cord
Cleaning thee
Endorser
into the appropmte hook.
If paper scraps and dust accumulate m the
VlClmty of the prlnUng section of the En-
dorser, pnntmg quahty wdl be adversely
affected If the printing secUon becomes d~,
gently wipe the pomon shown m whtte m
the tllustrat~on below with a dry, soft cloth
m Slide the protrusion on the bottom of
the cover into the output table, and
then push the cover dosed.
~~
D Do not wipe any portion other than that
[
~~~
~
whlch
1S
shown In whlte above In adch-
~__.~~
~
Uon, do not touch the prmtmg secUon
Doing so may get your fingers duty, and
could damage the printing secuon
32