Rame the r~ar portion of the Endoner,
and then pull the Endorser out.
When Charactem Printed by the Endorser are Too Light
or the Original Gets Dirty
~]~lmportant
Do not pull on the Endorser's cord
Place the Endorser down with the
printing section facmg up.
,
Gently press the old ink ribbon car-
tridge down fl), and then pull it out ¢~.
Push a new mk n"obon cartridge mto
the Endorser.
~] Ahgn the endorser w~th the hooks on
the scanner as shown in the dmgran~
~[~lmportant
Do not touch the printing section of the
Endorser Doing so may get your fin-
gers chrty, and could damage the printing
secuon
31