Advanced; Static Route - Billion BiPAC 7402GL R4 User Manual

Advanced

Configuration options within the Advanced section are for users who wish to take advantage of
the more advanced features of the router. Users who do not understand the features should not
attempt to reconfigure their router, unless advised to do so by support staff.
These are the items within the Advanced section: Static Route, Static ARP, Dynamic DNS,
Check Email, Device Management and IGMP.

Static Route

Go to Configuration > Advanced > Static Route.
Destination: This is the destination subnet IP address.
Netmask: Subnet mask of the destination IP addresses based on the above destination subnet IP.
Gateway: This is the gateway IP address to which packets are to be forwarded.
Interface: Select the interface through which packets are to be forwarded.
Cost: This is the same meaning as Hop. This should usually be left at 1.
102