Basic - Billion BiPAC 6300VNOZ User Manual

4.4.3.1 Basic

Register to a SIP service provider is an essential step before making the VoIP call. Users can find out SIP
service provider, and register a SIP account, jotting down the registration information and configuring in router.
Locale RTP Port: Set the local RTP port used to receive voice packet. The setting is to be applied to the two
FXS, name phone 1 and phone 2, and the two FXS share the same local RTP port.
Phone: Select "1", the following parameters will be applicable to Phone1. In 6300VNOZ, phone 1 and phone 2
are allowed to be of different characteristics, including different SIP registrar. So, user needs to configure
individually for phone1 and phone 2.
Phone Number: Set you phone number or outgoing call number, which is usually obtained when registering in
your ITSP. It is used for destination to identify which this call is made from.
Display Name: A user-friendly display name for the phone number to be easily identified.
Authentication Name: Set the account used to register, usually the Phone Number.
Password: Set the registering account password.
User Domain: Set the SIP Registrar Domain name you are going to register to, usually just the SIP registrar
address.
SIP Registrar Address: Enter the SIP registrar address where offers the service of registering the VoIP
account. It is definitely a VoIP server.
SIP Registrar Port: Type the port; it will listen to register requests from VoIP devices.
SIP Registration Expire: Set the time interval. The device can update (usually re-login the account) the VoIP
account information with the SIP server very the time interval.
SIP Proxy Address: Enter the SIP proxy address provided by your ITSP. When destination and source phones
are not sharing the same SIP registrar domain, the SIP proxy is needed to deliver call information and make the
communication through.
SIP Proxy Port: Set the SIP proxy port.
SIP Outbound Proxy Address: Set the SIP outbound proxy address. It is usually used to realize the
communication between two phones when at least one of them is located behind a NAT router.
SIP Outbound Proxy Port: Set the SIP Outbound proxy port.
81