Multitech ProxyServer MTPSR1-202ST User Manual page 64

ProxyServer User Guide
19. Click Add. You are returned to the Microsoft TCP/IP Properties dialog box, DNS tab, and the
new address is displayed in the DNS Search Order list.
Your network may have more than one DNS server, allowing you to use a secondary DNS server
if the primary DNS server is not available. If this is the case, add the IP address of the secondary
DNS server using the same procedure as with the first.
Note: The address that appears first (at the top of the list) is the primary server (the first one
searched). You can use the Up and Down buttons to rearrange the items in the list, if necessary,
until the primary DNS server is listed first.
When this is done, click OK. You are returned to the Network dialog box.
Use the following checklist to record all the configuration settings for future use:
IP Address (PC)
IP Address (ProxyServer)
Host (User Name)
Domain
DNS Server Address
Network Adapter
(Manufacturer/Model Number)
20. Reboot the PC for changes to take effect.
At this point your client setup is complete. Test your setup by following steps 21 and 22. If you
encounter problems, contact you administrator.
21. Initiate an Internet session by double-clicking your browser icon, or try to FTP a file.
Note: The ProxyServer operates transparently, so there should not be a need for any special
proxy settings on your IP applications (i.e., browser, Telnet, or FTP). Set up each application as
"No Proxy" or equivalent; or, connect to the Internet over the LAN.
22. To further validate your connection to the ProxyServer, "Ping" the IP address of the ProxyServer.
64
Configuration Checklist
.
.
.
. .
. .
. .
MTPSR1-202ST