Front Panel - Multitech ProxyServer MTPSR1-202ST User Manual

ProxyServer User Guide

Front Panel

The front panel of the ISDN ProxyServer contains three groups of LEDs that provide the status of the
Ethernet LAN connection, the ISDN WAN connection, and the general status of the ProxyServer (Fail
and Power).
The Ethernet LAN LEDs display the activity of the LAN if the ProxyServer is connected to the LAN,
transmitting or receiving packets, and if a collision is occurring. The ISDN LEDs, or WAN port LEDs,
display the status of the port and show if the link is ready to transmit or receive serial data, and if one
or both Bearer Channels are active. The general group of LEDs indicates whether the self test
passed or failed and if the power On/Off switch on the back of the ProxyServer is set to On.
Ethernet
RD Receive Data indicator blinks when packets are being received from the local area network.
TD Transmit Data indicator blinks when packets are being transmitted to the local area network.
CL Collision indicator lights when a collision is in progress; that is, when two nodes are
transmitting packets at the same time.
LK Link indicator lights indicating that the ProxyServer is connected to the local area network.
ISDN
RCV Receive indicator blinks when the ISDN line is receiving data.
XMT Transmit indicator blinks when the ISDN line is transmitting data.
B1 Bearer Channel 1 indicator is ON steady when an active data connection is present. Slowly
blinks when an active analog connection is present. Blinks fast when ringing.
B2 Bearer Channel 2 indicator is ON steady when an active data connection is present. Slowly
blinks when an active analog connection is present. Blinks fast when ringing.
TR Terminal Ready (TR) indicator lights when the ProxyServer is dialing and remains ON as
long as a link connection is available.
CS The Clear to Send (CS) indicator lights during any communication with the Central Office
over the ISDN Line.
General
Fail Fail indicator lights when a self test fails to complete as expected and during boot-up.
Power The power indicator lights when the ON/OFF Switch is in the ON position.
8
Figure 1-2. Front Panel
MTPSR1-202ST