Resizing Originals By Entering A Scaling Value (Mac Os X) - Canon imagePROGRAF iPF6300S User Manual

Enhanced Printing Options
7.
Select and click a roll paper in the
8.
Select the width of the loaded roll in the
9.
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO A4.
10.
Select the
11.
Click ISO A4 in the
12.
F
Click Scaling and enter 120.
2
13.
Confirm the print settings and print as desired.
88

Resizing Originals by Entering a Scaling Value (Mac OS X)

This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example.
• Document: Any Type
Resizing Originals by Entering a Scaling Value (Mac OS X)
> Printing enlargements or reductions
L
Paper Source list.
C
Enlarged/Reduced Printing check box.
G
Paper Size list.
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom
and right edges of the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner. In this case, you can center originals by selecting
Layout sheet.
Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows)
>
M
Roll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm).
E
Print Centered on the
"
→P.207
iPF6300S