Canon imagePROGRAF iPF6300S User Manual page 142

Enhanced Printing Options
2.
Click the Page Setup tab to display the Page Setup sheet.
2
3.
Select and click a roll paper in the
4.
O
Click Size Options to display the Paper Size Options dialog box.
5.
Enter a desired paper name in Custom Paper Size Name. My Horizontal Banner is used in this example.
6.
In Units, click mm.
7.
Under Paper Size, enter 100 in Width and 500 in Height.
8.
Click Add to add the paper size of My Horizontal Banner.
9.
Click OK to close the Paper Size Options dialog box.
10.
Close the printer driver dialog box.
124
Note
• Although you can even set Custom Size for the paper size, the maximum settable size is 3.2 m. The setting
of Custom Size is disabled when you exit the application software.
For more information, see " Printing on Non-Standard Paper Sizes (Windows)
Creating the banner in the application
Follow the steps below to create the banner in Microsoft Word using the Custom Paper Size you registered.
1.
Start Microsoft Word.
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
> Printing banners or at other non-standard sizes
L
Paper Source list.
>
"
→P.132
iPF6300S