Siemens Advance Network Gateway User Manual page 48

Editing the Address Translation Table,
Editing the ATT
40 Data Communications Setup
4. To display the ATT by IP number type: display ip xxx.xxx.xxx.xxx
Where xxx.xxx.xxx.xxx is the IP address. If you leave off the IP ad-
dress, the IP portion will default to the value of the local ANG_EN.
Note: 255.255.255.255 and 0.0.0.0 are not allowed.
1. To delete a single entry from the ATT type: del adh loop unit
Where loop is the ADH loop number (1 - 8) and unit is the ADH unit
number (1-31).
All parameters must be specified.
Continued
2000590-001