Siemens Advance Network Gateway User Manual page 39

Establishing a Connection,
How to Log On
2000590-001
Continued
The following procedure assumes that the Windows Hyper Terminal pro-
gram residing on your PC has been configured, the ANG_EN is opera-
tional and the PC is connected to the ANG_EN.
1. Open Windows Hyper Terminal program on your PC or double click
the shortcut icon to start; See Configuring PC.
Enter twice.
2. Press
The following dialog box appears
prompt type: login password and press
3. At the
The Connect Screen will appear with the log in information and the
local prompt. The local prompt indicates that your are communicating
with the ANG_EN connected directly to the PC.
You are now ready to configure the Advance Network Gateway
(ANG_EN) with its own Network Address and ADH Loop and Unit Num-
ber; go to page 33.
Enter.
2.0.1
Data Communications Setup 31