Cisco 7960G Administration Manual page 72

How to Use the Command-Line Interface to Monitor Phones
Table 5-1 CLI Commands
Command
SIP Phone> clear {arp | ethernet | ip-stats | malloc
| mwi | reset-log | tcp-stats}
SIP Phone> debug {arp | console-stall | cpr-error |
cdp | dsp-keepalive | strlib | malloc | malloctable |
sk-platform | flash | dsp | vcm | dtmf | task-socket
| lsm | fsm | auth | fim | gsm | cc | cc-msg | error
| sip-task | sip-state | sip-messages | sip-reg-state
| sip-trx | dns | config | sntp | sntp-packet | http
| arp-broadcast | xml-events | xml-deck | xml-vars |
xml-post}
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
5-2
Chapter 5
Purpose
Clears the following, depending on the keywords used:
arp—Address Resolution Protocol (ARP) cache.
•
ethernet—Network statistics.
•
ip-stats—IP statistics.
•
malloc—Memory allocation.
•
• mwi—Message-waiting indicator.
• reset-log—Cumulative log that has been collected by the
phone.
• tcp-stats—TCP statistics.
Shows detailed debug output for the following, depending on
the keywords used:
arp—ARP cache.
•
console-stall—Console-stall driver output mode.
•
cpr-error—Cisco Portable Runtime error conditions
•
cdp—Cisco Discovery Protocol.
•
dsp-keepalive—Messaging between the DSP and the
•
main phone control.
strlib—String library.
•
malloc—Memory allocation.
•
• malloctable—Memory allocation table. The table can be
viewed with the show malloctable command.
• sk-platform—Platform.
flash—Flash memory information.
•
dsp—Digital signal processor (DSP) accesses.
•
vcm—Voice Channel Manager (VCM), including tones,
•
ringing, and volume.
dtmf—Dual-tone multifrequency (DTMF) relay.
•
task-socket—Socket task.
•
lsm—Line State Manager.
•
• fsm—Feature State Manager.
• auth—SIP authorization state machine.
fim—Feature Interaction Manager.
•
gsm—Global State Manager.
•
cc—Call control.
•
cc-msg—Call-control messages.
•
error—General error debug output.
•
Monitoring Cisco SIP IP Phones
OL-7890-01