Product Overview - Cisco 7960G Administration Manual

Product Overview

This chapter provides the following information about the Cisco Unified IP Phone 7960G and 7940G:
•
•
•
•
•
•
•
•
•
•
•
•
•
New Information for This Release
The following changes have been made and the following features have been added to release 8.0:
•
•
Cisco Unified IP Phone 7960G and 7940G Overview
Cisco Unified IP Phone 7960G and 7940G models are full-featured telephones that can be plugged
directly into a SIP network and can be used very much like a standard PBX telephone. Phone terminals
can attach to the existing data network infrastructure, using 10BASE-T and 100BASE-T interfaces on
an Ethernet switch.
OL-7890-01
New Information for This Release, page 1-1
Cisco Unified IP Phone 7960G and 7940G Overview, page 1-1
Session Initiation Protocol Overview, page 1-6
BTXML Support, page 1-8
Cisco IP Phone Services, page 1-8
Network Capabilities, page 1-9
Configuration Features, page 1-9
Signaling Support, page 1-10
Dial-Plan and Messaging Support, page 1-10
Routing and Proxy Support, page 1-11
Supported Languages and Character Set, page 1-12
Supported Protocols, page 1-13
Where to Go Next, page 1-14
New configurable parameters have been added. See
Caveats can be found on the product release notes page at this URL:
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps2156/prod_release_notes_list.html
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
C H A P T E R
Appendix D, "SIP IP Phone Parameters."
1
1-1