Cisco 7960G Administration Manual page 55

Chapter 3 Initializing Cisco Unified IP Phones
Procedure
Using an ASCII text editor such as vi, open the SIPDefault.cnf file.
Step 1
Modify the following SNTP parameters as needed:
Step 2
sntp_mode
•
sntp_server
•
time_zone
•
Modify the following common DST parameters as needed:
Step 3
• dst_offset
• dst_auto_adjust
• dst_start_month
dst_stop_month
•
dst_start_time
•
dst_stop_time
•
Do one of the following:
Step 4
Modify the following absolute DST parameters as needed:
•
–
–
• Modify the following relative DST parameters as needed:
–
–
–
–
Save the file to the root tftp directory of your TFTP server.
Step 5
Note To adjust the phone display to European Day-Month-Year format, add the following entry to the
SIPDefault.cnf file: date_format:D/M/Y.
OL-7890-01
dst_start_day
dst_stop_day
dst_start_day_of_week
dst_start_week_of_month
dst_stop_day_of_week
dst_stop_week_of_month
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
How to Set the Date and Time
3-19