Cisco 7960G Administration Manual page 178

Table D-3
Parameter
Proxy Port
Short Name
Table D-4
Parameter
Line 1 settings
Line 2 settings
Line 3 settings
Line 4 settings
Line 5 settings
Line 6 settings
Messages URI
Preferred Codec
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
D-20
SIP Parameters (continued)
Manual SIP Parameter Configuration
Appendix D
Description
(Phone-specific) Port number of the primary SIP
proxy server. This is the port that the SIP client
will use. The default is 5060.
(Phone-specific) Name or number associated with
the linex_name as you want it to display on the
phone LCD if the linex_name value exceeds the
display area. For example, if the linex_name value
is the phone number 111-222-333-4444, you can
specify 34444 for this parameter to have 34444
display on the LCD instead. Alternatively, if the
value for the linex_name parameter is the e-mail
address "username@company.com", you can
specify the "username" to have just the username
appear on the LCD instead. This parameter is used
for display only. If a value is not specified for this
parameter, the value in the Name variable is
displayed.
Description
Displays the SIP settings that are defined in
Table D-2.
(Optional) Configures the voice-mail number that
is dialed when the messages button is pressed.
Value is typically a phone number but can be a
URI.
(Optional) Codec to use when a call is initiated.
Valid values are g711alaw, g711ulaw, g729a, and
none. Default is g711ulaw.
SIP IP Phone Parameters
OL-7890-01