Cisco 7960G Administration Manual page 167

Appendix D SIP IP Phone Parameters
Table D-1
Parameter
http_proxy_addr
http_proxy_port
image_version
language
linex_authname
linex_contact
linex_displayname
linex_name
linex_password
linex_shortname
OL-7890-01
Configuration File Parameters (continued)
Description
(Optional) IP address of the HTTP proxy server. You can use either
a dotted IP address or a DNS name.
(Optional) Number of the HTTP proxy port. Default is 80.
Firmware version that the phone should use. Enter the name of the
image version as it is released by Cisco. Do not enter the filename
extension (.bin).
Note
(Optional) This parameter is for future use. English is the only value
that is currently supported.
(Phone-specific; optional) Name used by the phone for
authentication if a registration is challenged by the proxy server
during initialization. It is required only if a proxy server requires
authentication from phones. If a value is not configured for the
linex_authname parameter when registration is enabled, the default
name is used. Default is UNPROVISIONED. The x argument can be
1 or 2.
(Phone-specific; optional) The URL that appears in the contact field
for SIP messages on a particular line.
x is a line number on the phone. Default value is null.
(Phone-specific; optional) Identification as it should appear for
caller-identification purposes. For example, instead of
jdoe@company.com appearing on phones that have caller ID, you
can specify User A in this parameter to have User A appear on the
called party display. If a value is not specified for this parameter,
nothing is used.
The x argument can be 1 or 2.
(Phone-specific) Number or e-mail address for use when
registering. Enter a number without dashes. For example, enter
555-0100 as 5550100. Enter an e-mail ID without the host name.
The x argument can be 1 or 2.
(Phone-specific; optional) Password used by the phone for
authentication if a registration is challenged by the proxy server
during initialization. If a value is not configured for the
linex_password parameter when registration is enabled, the default
password is used. Default is UNPROVISIONED.
Valid values for x are (Cisco IP 7969G phone) 1 to 6 and
(Cisco IP 7940G phone) 1 to 2.
Labels a line key with a name other than the directory number.
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
You cannot change the image version by changing the
filename because the version is also built into the file
header. Trying to change the image version by changing the
filename causes the firmware to fail when it compares the
version in the header against the filename.
D-9