Cisco DPC2434 User Manual page 79

How Do I Configure the Wireless Home Gateway?
Configuring MAC Address Filters
Use the Setup Advanced Settings - MAC Filtering page to configure MAC address
filters. These filters allow you to deny or block access to the Internet by the
individual MAC addresses listed in the table. You can also prevent individual PCs
from sending outgoing TCP/UDP traffic to the WAN using their MAC address.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the wireless home
gateway default advanced MAC filtering settings.
Click MAC Address Filtering in the Advanced Settings section of the Setup page to
access the Setup Advanced Settings - MAC Filtering page.
Setup Advanced Settings - MAC Filtering Page Example
The following illustration is an example of the Setup Advanced Settings - MAC
Filtering page.
4011350 Rev D 79