Cisco DPC2434 User Manual page 129

Setup Wireless - Access Control Page Description
This section describes the section headings and field descriptions of the Setup
Wireless - Access Control page.
Field Name
Access restriction
Closed Network
Access List
Connected Clients
Function Keys
The following function keys appear on the Setup Wireless – Access Control page.
Key
Apply
Clear All
Remove
Add
4011350 Rev D
Description
When encryption is enabled, this selection allows you to
choose one of the following options from the drop-down
list:

Disable (factory default)–No access restrictions based
on MAC address of wireless access devices

Allow–Allows wireless access to only the MAC
addresses listed in the Access List

Deny–Denies wireless access to only the MAC
address listed in the Access List
Allows you to disable or enable the network to access by
wireless clients. When ON is selected, the access point
does not broadcast the SSID. The client device must be
configured manually with the SSID and the MAC address
of the access point in order to access with wireless
network.
Displays the MAC address of the clients that are subject
to wireless access control
Displays the Host Name, IP Address, and Client ID of
wireless clients that are connected to (associated with) the
gateway modem
Description
Applies and saves the values you enter into the fields
without closing the screen
Clears the Access List
Removes entries from the Access List
Adds a client to the Access List using the MAC address of
the client
How Do I Configure the Wireless Home Gateway?
129