Cisco DPC2434 User Manual page 66

How Do I Configure the Wireless Home Gateway?
Configuring the Default Network Settings
You can use the default network settings, or, if your system requires different
settings to operate correctly, you can change the default network settings using the
Setup Basic Settings – Network Configuration page.
Note: If you are not familiar with the network configuration procedures detailed in
this section, contact your service provider before you attempt to change any of the
wireless home gateway default network configuration settings.
Click Network Configuration in the Basic Settings section of the Setup page to
access the Setup Basic Settings – Network Configuration page.
Setup Basic Settings – Network Configuration Page Example
The following illustration is an example of the Setup Basic Settings – Network
Configuration page.
66 4011350 Rev D