Cisco DPC2434 User Manual page 120

How Do I Configure the Wireless Home Gateway?
Field Name
RADIUS Server
RADIUS Port
RADIUS Key
Group Key Rotation
Interval
WPA/WPA2 Re-auth
Interval
120
Description
Allows you to enter the IP address of the RADIUS server
used for authentication and encryption key derivation.

This field is used with 802.1x and WPA Network
Authentication.

The factory default for this field is 0.0.0.0.
Determines the port number of the RADIUS server. The port
number is usually 1812 (factory default) or 1645, depending
on the server used.
This field is used with 802.1x and WPA Network
Authentication.
Allows you to set the Shared Secret key for your RADIUS
connection.

The factory default for this field is empty.

This field is used with 802.1x and WPA Network
Authentication.
Allows you to set the WPA Group Key Rotation Interval in
seconds. This only applies when WPA or WPA2 Network
Authentication is enabled.
Set this value to 0 (factory default) to disable periodic
re-keying. The valid range is 1 to 4,294,967,295 seconds.
Allows you to set the WPA/WPA2 Re-authorization Interval
in seconds. This only applies when WPA/WPA2 Network
Authentication is enabled.
Set this value to 0 (factory default) to disable periodic
re-keying. The valid range is 1 to 4,294,967,295 seconds.
4011350 Rev D